半金属摩阻材料中铜纤维摩擦磨损行为的研究

用扫描电子显微镜(SME)和X-射线能谱分析法(EDX)对铜纤维增强的半金属摩阻材料与灰铸铁对偶滑摩后的摩擦表面进行了分析,研究了摩阻材料中铜纤维的摩擦磨损行为.结果表明,在摩擦磨损过程中,摩阻材料摩擦表面上铜的分布更加弥散化,并且铜纤维具有集铁作用,因而摩阻材料摩擦表面上形成了富铁贫铜表面工作层;铜能从摩阻材料摩擦表面转移到对偶摩擦表面,故对偶摩擦面上分布一定量铜,这是摩擦副具有稳定摩擦系数和良好耐磨性的关键因素;铜纤维取向对摩阻材料摩擦磨损行为有显着影响.     

TiB2和SiCW对Al2O3陶瓷材料高温摩擦磨损特性的影响

研究了Ａｌ２Ｏ３、Ａｌ２ｏ３／ＴｉＢ２和Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ三处陶瓷材料在不同条件下的擦靡损特性。结果表明：三种陶瓷材料与硬质合金摩擦副的摩擦系数随温度温度的增加有不同的变化规律，摩擦表面的Ｘ射线衍射分析表明，摩擦系数的变化与陶瓷物膜的和结构有关，在高温下Ａｌ２Ｏ３／ＴｉＢ２陶瓷材料摩擦表面形成了具有优良的高温润性的ＴｉＯ２氧化膜，因而ＴｉＢ２的加入明显改善了Ａｌ２Ｏ３陶瓷材料 摩擦磨损     

Knowledge-based diagnosis of drill conditions

One major bottleneck in the automation of the drilling process by robots in the aerospace industry is drill condition monitoring. This paper describes a system approach to solve this problem through the advancement of new machine design, sensor instrumentation, metal-cutting research, and intelligent software development. All drill failures can be detected and distinguished: chisel edge wear, flank wear, crater wear, margin wear, corner wear, breakage, asymmetry, lip height difference, and chipping at lips. However, in the real manufacturing environment, different workpiece materials, drill size, drill geometry, drill material, cutting speed, feed rate, etc. will change the criteria for judging the drill condition. The knowledge base used for diagnosing the drill failures requires a huge data bank and prior exhaustive testing. A self-learning scheme is therefore introduced to the machine in order to acquire the threshold history needed for automatic diagnosis by using the same new tool under the same drilling conditions.     

超低膨胀陶瓷K_（2x）Ba_（1－x）Zr_4（PO_4）_6系统的X射线衍射

用高温Ｘ射线衍射方法对磷酸锆钡钾系统陶瓷材料的各向异性热膨胀作了研究．对七个组份试样的７７套高温Ｘ射线衍射图作了仔细的指标化和精密点阵常数测定．点阵常数随温度作非线性变化·对Ｋ_２ｘＢａ_１－ｘＺｒ_４（ＰＯ_４）_６的不同组份不同温度（３００～１３００Ｋ）的热膨胀系数。α_ａ、α_ｃ、　作了测定·该系统零膨胀陶瓷的组份为Ｋ_１．１６Ｂａ_０．４２Ｚｒ_４（ＰＯ_４）_６（ｘ＝０．５８）     

凝析气井井筒动态预测方法

利用垂直管流公式,结合流体相平衡热力学闪蒸计算,运用状态方程模拟,给出凝析气井井筒动态预测新方法.根据该方法.结合油藏数值模拟计算的结果,可准确地预测不同生产时期凝析气井的井筒动态.     

热致液晶性纤维素衍生物及其热塑性塑料复合物熔体流变行为的研究

用毛细管流变仪研究了乙基纤维素（ＥＣ）及其高密度聚乙烯（ＨＤＰＥ）复合物，纤维素芳族酯（ＣＡＥ）及其聚碳酸酯（ＰＣ）复合物的剪切流变特性和机理。结果表明，ＥＣ对ＨＤＰＥ／ＥＣ复合物的粘度影响不大，而少量（５％）ＣＡＥ的加入使ＰＣ／ＣＡＥ复合物粘度大大下降，且复合物流变曲线呈现新的特征。     

Distinguished Scientific Awards for an Early Career Contribution to Psychology.

The Early Career Awards recognize the large number of excellent young psychologists. Recipients of this award may not have held a PhD for more than nine years. The areas considered in 1991 were animal learning and behavior, developmental, and personality. The winners for 1991 were Kent C. Berridge, Susan A. Gelman, and Randy J. Larsen. For each winner a citation, biography, and selected bibliography of their works are presented. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

航空齿轮表面硬化层断裂性能研究

按照航空齿轮的具体工艺过程，对材料12Cr2Ni4A的拉伸试样和断裂试样进行设计和加工，通过三点弯曲实验，重点研究了齿轮材料硬化层的硬度分布，硬化试样拉伸力学性能参数和断裂性能参数，实验结果表明，所采用试样的加工工艺方案是可行的，所获得的Kc基本反映我国航空硬化齿轮材料的断裂性能特征，为定量预测航空硬化齿轮疲劳寿命提供实验和理论分析的依据。     

n-Al2O3/Ni复合镀层的组织与滑动磨损性能研究

用电刷镀技术制得了镍基n-Al2O3复合镀层，并对镀层的滑动磨损性能进行了试验研究。纳米复合镀层的表面形貌比较细腻，镀层中纳米粒子分布均匀，与基质金属结合紧密。镀层显微硬度达到HV700，比快速镍镀层提高约40％。滑动磨损试验结果表明，随着纳米粒子含量的增大，镀层的耐磨性提高，摩擦系数也呈增大趋势；但当镀层中n-Al2O3粒子的超过2.56%(质量分数）时，镀层的耐磨性显著下降。纳米复合镀层的磨损机制以疲劳磨损为主，而快速镍底层以粘着磨损为主。